Vent venligst...
Varen er tilføjet indkøbskurven. Se indkøbskurv her
Tom Indkøbskurv

SUPERMICRO Motherboard (socket G34)

Forsiden Komponenter Bundkort SUPERMICRO Motherboard (socket G34)
For at se vore priser skal du være oprettet som kunde: Er du allerede oprettet som kunde skal du logge ind.
SUPERMICRO Motherboard (socket G34) (MBD-H8QGL-IF+-O)

SUPERMICRO Motherboard (socket G34)

Varenr.:
MBD-H8QGL-IF+-O
EAN:
0672042089581
  • Processor-socket Sokkel G34
  • Chipset AMD SR5690
  • M.2 Slot 0
  • Hukommelses slots 16 x DIMM, DDR3
  • Maksimal RAM-frekvens 1.333GHz
  • Max hukommelse understøttet 512GB
  • Form Factor SWTX
Beskrivelse

H8QGL-iF+



Key Features
1. Quad AMD Opteron™ 6100 Series
    processors (G34) 12/8-Core
    ready; HT3.0 Link support
2. AMD SR5690 + SP5100 Chipset
3. Up to 256GB of DDR3 Registered ECC
    1333/1066/800 or 64GB of DDR3
    Unbuffered ECC/non-ECC SDRAM in
    16 DIMMs
4. Intel 82576 Dual-Port Gigabit Ethernet
    LAN
5. 6x SATA2 3.0 Gbps Ports via
    AMD SP5100 controller, RAID 0, 1, 10
6. 1 PCI-E x16 and 1 HT connector
7. Integrated Matrox G200 Graphics
8. IPMI 2.0 with Dedicated LAN support
Product SKUs
MBD-H8QGL-iF+
  • H8QGL-iF+ (Standard Retail Pack)
 
Physical Stats
Form Factor
  • SWTX
Dimensions
  • 16.48" x 13" (41.9cm x 33.0cm)
 
Processor/Chipset
CPU
  • Quad 1944-pin Socket G34
  • Supports up to four Twelve/Eight-Core ready AMD Opteron™ 6100 Series processors
  • HT3.0 Link support
Chipset
  • SR5690 and SP5100
 
System Memory
Memory Capacity
  • 16 DIMM sockets
  • Support up to 256GB DDR3 1333/1066/800 MHz memory
  • Quad channel memory bus
  • See Detailed Memory Support Matrix
Memory Type
  • DDR3 1333/1066/800 MHz Registered ECC SDRAM or Unbuffered ECC/non-ECC 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes
  • 1GB, 2GB, 4GB, 8GB, 16GB
Memory Voltage
  • 1.35V or 1.5V
Error Detection
  • Corrects single-bit errors
  • Detects double-bit errors (using ECC memory)
 
On-Board Devices
SATA
  • AMD SP5100 (RAID 0, 1, 10)
IPMI
  • Support for Intelligent Platform Management Interface v.2.0
  • IPMI 2.0 with virtual media over LAN and KVM over LAN support
  • Winbond® WPCM+450 BMC
Network Controllers
  • Intel® 82576 controller, Dual-Port
      Gigabit Ethernet
  • 10/100/1000BASE-T support
VGA
  • Matrox G200 16MB DDR2
Super I/O
  • Winbond® W83527 chip
 
Input / Output
SATA
  • 6x SATA2.0 (3Gb/s) Ports
LAN
  • 2 RJ45 LAN ports
  • 1 RJ45 Dedicated LAN supports IPMI
USB
  • 7x USB 2.0 ports
  • 2x Rear, 2x header-4x ports, and 1x TypeA
VGA
  • 1x VGA port
Keyboard / Mouse
  • PS/2 keyboard and mouse ports
Serial Ports
  • 1x Fast UART 16550 serial port
  • 1x serial port header
 
Expansion Slots
PCI-E/PCI
  • 1 PCI-E 2.0 x16
  • 1 HT connector
Chassis ( Optimized for H8QGL-iF+ )
1U Chassis
  • CSE-818TQ-1400B
    (rev. K required. Air Shroud MCP-310-8180B-0B)
 
System BIOS
BIOS Type
  • 16Mb SPI Flash ROM with AMI® BIOS
BIOS Features
  • Plug and Play (PnP)
  • APM 1.2
  • DMI 2.3
  • PCI 2.2
  • ACPI 1.0/2.0
  • USB Keyboard Support
  • SMBIOS 2.3
  • Real Time Clock Wakeup
 
Management
Software
  • IPMI (Intelligent Platform Management Interface) 2.0
  • Super Doctor III
Power Configurations
  • ACPI Power Management
  • Wake-On-LAN (WOL) header
  • Keyboard Wakeup from Soft-Off
  • Power-on mode control for AC power loss recovery
 
PC Health Monitoring
CPU
  • Monitors CPU Core Voltages, +1.8V, +3.3V, +5V, ±12V, +3.3V Standby, VBAT, HT, memory, chipset
  • CPU switching voltage regulator
FAN
  • Up to 9-fan status tachometer monitoring
  • Up to nine 4-pin fan headers
  • Status monitor for speed & on/off control
  • 3-pin fan support (w/o speed control)
  • Low noise fan speed control
     (4-pin fan only)
  • Pulse Width Modulated (PWM) fan connectors
Temperature
  • Monitoring for CPU and chassis environment
  • CPU Thermal Trip Support
  • Thermal control for 9x Fan connectors
  • I2C Temperature Sensing Logic
LED
  • CPU / System Overheat
  • Suspend-state indicator
  • +5V Standby Alert
  • UID/Remote UID
Other Features
  • Chassis Intrusion Detection
  • Chassis Intrusion Header
 
Operating Environment / Compliance
RoHS

  • RoHS Compliant 6/6, Pb Free
Environmental Specifications
  • Operating Temperature:
       10°C to 35°C (50°F to 95°F)
  • Non-operating Temperature:
       -40°C to 70°C (-40°F to 158°F)
  • Operating Relative Humidity:
       8% to 90% (non-condensing)
  • Non-operating Relative Humidity:
       5% to 95% (non-condensing)
 
Regulatory
FCC
  • Passed to meet FCC standard requirement

Selvom vi gør vort bedste for at give fyldestgørende information, så er billederne kun vejledende, og selve varen er ikke nødvendigvis 100% identisk med det viste billede. Produkter kan være vist med ekstraudstyr der ikke er inkluderet eller i andre form- og farvevarianter. Hvis der er forskel mellem produktoverskrift, beskrivelse og billede, så er det produktoverskriften som gælder. Hvis du er i tvivl, så kontakt os gerne. Vi tager forbehold for trykfejl, ændring af priser og specifikationer uden varsel.
Comby Greenland A/S - Issortarfimmut 2-4 - 3900 Nuuk - +299 34 26 70 - info@comby.gl - CVR. nr. 12 35 63 58