| Machine types |
7Y00 - 1 year warranty
7Z01 - 3 year warranty |
| Form factor |
2U rack. |
| Processor |
One AMD EPYC 7002 Series processor (formerly codenamed "Rome") or AMD EPYC 7003 Series processors (formerly codenamed "Milan"). Supports processors up to 64 cores, core speeds of up to 4.1 GHz, and TDP ratings of up to 280W. |
| Memory |
16 DIMM slots. The processor has 8 memory channels, with 2 DIMMs per channel. Lenovo TruDDR4 RDIMMs are supported. DIMMs are available in two speeds: 3200 MHz and 2933 MHz. With 3200 MHz memory, the server supports a 3200 MHz memory bus speed at 1 DIMM per channel (DPC) and 2933 MHz at 2 DPC. With 2933 MHz memory, the server supports a 2933 MHz memory bus speed at both 1 and 2 DPC. |
| Memory maximum |
Up to 2TB with 16x 128GB 3DS RDIMMs |
| Persistent memory |
Not supported. |
| Memory protection |
ECC, SDDC, Patrol/Demand Scrubbing, DRAM Address Command Parity with Replay, DRAM Uncorrected ECC Error Retry, Post Package Repair |
| Disk drive bays |
Up to 20x 3.5-inch or 32x 2.5-inch hot-swap drive bays*:
- Front: up to 12x 3.5-inch or 24x 2.5-inch, hot-swap bays
- Mid (internal): up to 4x 3.5-inch or 8x 2.5-inch, hot-swap bays
- Rear: up to 4x 3.5-inch or 4x 2.5-inch hot-swap bays
With 2.5-inch drive bays, mid (internal) bays and rear drives are mutually exclusive. Mid bays are hot-swap drive bays and are accessible by removing the top cover of the server. 4x 3.5-inch front drive bays can be configured as AnyBay supporting SAS, SATA or NVMe. 2.5-inch drive bays can be configured as NVMe, supporting 28x NVMe drives with direct connections (no oversubscription), or 32x NVMe drives with 2:1 oversubscription.
* Note: The server supports at most 32 drives, even though there are 36 physical 2.5-inch drive bays.
|
| Maximum internal storage |
- 2.5-inch drives:
- 245.76TB using 32x 7.68TB 2.5-inch SAS/SATA SSDs
- 368.64TB using 24x 15.36TB 2.5-inch NVMe SSDs
- 76.8TB using 32x 2.4TB 2.5-inch HDDs
- 3.5-inch drives:
- 360TB using 20x 18TB 3.5-inch HDDs
- 153.6TB using 20x 7.68TB 3.5-inch SAS/SATA SSDs
- 30.72TB using 4x 7.68TB 3.5-inch NVMe SSDs
|
| Storage controller |
- Onboard SATA supporting up to 16 SATA drives (no RAID)
- 12 Gb SAS/SATA RAID adapters:
- RAID 530i (cacheless) supports RAID 0, 1, 10, 5, 50
- RAID 730-8i with 1GB cache supports RAID 0, 1, 10, 5, 50
- RAID 730-8i with 2GB flash-backed cache supports RAID 0, 1, 10, 5, 50, 6, 60
- RAID 930-8i with 2GB flash-backed cache supports RAID 0, 1, 10, 5, 50, 6, 60
- RAID 930-16i and 24i with 4GB or 8GB flash-backed cache supports RAID 0, 1, 10, 5, 50, 6, 60
- 12 Gb SAS/SATA non-RAID: 430-8i and 430-16i HBAs
|
| Optical drive bays |
No internal optical drive. |
| Tape drive bays |
No internal backup drive. |
| Network interfaces |
Dedicated OCP 3.0 SFF slot with PCIe 4.0 x16 host interface. Supports a variety of 2-port and 4-port adapters with 1GbE, 10GbE and 25GbE network connectivity. One port can optionally be shared with the ASPEED management processor for Wake-on-LAN and NC-SI support. |
| PCI Expansion slots |
A total of up to 9 PCIe 4.0 slots (8 with rear access, 1 internal for a RAID adapter) plus a slot dedicated to the OCP adapter. Slot availability is based on riser selection.
Slot length is dependent on the use of a mid-chassis drive cage: If the mid drive cage is present then slots are half-length; if the mid drive cage is not present, then slots are full-length.
- Riser 1: Slots 1, 2 and 3 - all FHHL or FHFL (16 or 32 lanes)
- Option 1*: 1=x16, 2=x8, 3=x8
- Option 2*: 1=x16, 2=x16 (no slot 3)
- Option 3: 3=x16 (no slot 1 or slot 2)
- Option 4: 1=x16 (no slot 2 or slot 3)
- Riser 2: Slots 4, 5, and 6 - slot size varies (32 lanes)
- Option 1: 4=x16, 5=x8, 6=x8
- Option 2: 4=x16, 5=x16 (no slot 6)
- Option 3: 6=x16 (no slot 4 or slot 5)
- Riser 3: Slots 7 and 8 - both FHHL or FHFL (16 or 32 lanes)
- Option 1*: 7=x8, 8=x8
- Option 2*: 7=x16, 8=x16
- Slot 9: Internal PCIe 4.0 x8 low-profile slot for internal drive controller
* The use of 32 lanes with Riser 1 or the use of Riser 3 imposes restrictions on the use of the onboard SATA controller or the use of the M.2 Module or both.
|
| Ports |
Front: Two USB 3.1 G1 (5 Gb/s) ports, optional VGA port.
Rear: USB 3.1 G1 (5 Gb/s) ports, one VGA video port, one DB-9 serial port, and one RJ-45 1GbE systems management port.
Internal: Optional M.2 module supporting up to two M.2 drives (for OS boot and drive storage support; not available in all configurations).
|
| Cooling |
Five or six N+1 redundant single-rotor hot swap 60 mm fans, configuration dependent. One fan integrated in each power supply. |
| Power supply |
Up to two hot-swap redundant AC power supplies (all 80 PLUS Platinum certification): 550 W, 750 W, 1100 W and 1600 W AC options, supporting 220 V AC. 550 W, 750 W and 1100 W options also support 110V input supply. In China only, all power supply options support 240 V DC. Also available is a 1100W power supply with a -48V DC input. |
| Video |
Onboard graphics with 512 MB memory with 2D hardware accelerator, integrated into the ASPEED AST2500 BMC management processor. Maximum resolution is 1920x1200 at 60Hz, 32bpp |
| Hot-swap parts |
Drives, power supplies, and fans. |
| Systems management |
ASPEED AST2500 embedded management processor, XClarity Provisioning Manager Lite (LXPM Lite) for system setup and firmware upgrades. XClarity Administrator centralized infrastructure management, and XClarity Energy Manager centralized server power management. Light path diagnostics for local failure detection and reporting. |
| Security features |
Power-on password, administrator's password, Trusted Platform Module (TPM), supporting TPM 2.0. In China only, optional Nationz TPM 2.0. Optional lockable front security bezel. Optional chassis intrusion switch. |
| Operating systems supported |
Microsoft Windows Server, Red Hat Enterprise Linux, SUSE Linux Enterprise Server, VMware ESXi. |
| Limited warranty |
Three-year or one-year (model dependent) customer-replaceable unit and onsite limited warranty with 9x5 next business day (NBD). |
| Service and support |
Optional service upgrades are available through Lenovo Services: 4-hour or 2-hour response time, 6-hour fix time, 1-year or 2-year warranty extension, software support for Lenovo hardware and some third-party applications. |
| Dimensions |
Width: 445 mm (17.5 in.), height: 87 mm (3.4 in.), depth: 764 mm (30.1 in.) |
| Weight |
Maximum: 35.4 kg (78.0 lb) |